-40%
Odyssey 2011 2017 Sliding Door Stainless Cable Brass Ended Repair Kit Part Japan
$ 41.71
- Description
- Size Guide
Description
We are the inventor and original seller of this kit as seen in our sales history.Our cables and brass ends are made in Japan.
The kit comes with pure brass alloy ends, the best
material
to withstand stress and abrasion.
Replicated
CHINESE products sold by the same seller under different seller IDs are all around.
Our customer service and technical command on the subject is unmatched. We sell the best quality cables to last with the age of your vehicle when installed properly.
Our Official Installation Video:
http://y2u.be/nVObexJB4fE
One of our customers uploaded a good video for
installation
:
http://y2u.be/8VHbF177xdI
Our kit requires no soldering by you which means n
o exposure to acid fumes and other chemical hazards.
Cables already have the brass ends soldered by us without flame or burning any material.
You do the crimping only on the pulley ends with the help of our 3 sheet instruction manual.
Sliding Doors usually get busted on 2011-2017 Honda Odysseys due to inferior quality of the cables used in the Mitsuba opener unit.
Our cables are:
- Made in Japan, stainless steeel
- Polyurethane coated (very robust and durable in all road/weather conditions)
- Rated at 300lbs linear tension
- Softer than the originals (easier to install on the pulley unlike the green Home Depot cable used on 3rd gen repairs.)
When you buy our pre-made/exact cut stainless cable set, you will receive:
- One short, one long pre-cut coated stainless steel cable kit with soldered ends.
- Four cable-end ferrules (you will need a crimping tool which can be obtained from any hardware store)
- One piece of tester cable to test your crimping tool and resulting ferrule shapes.
- 6 page (3 letter sheet) printed detailed instructions with B/W pictures.
IF YOU SHOULD HAVE ANY QUESTIONS OR DIFFICULTIES PLEASE WRITE US
. OUR TURN AROUND TIME IS VERY FAST.
ON THIS ITEM, THERE IS NO "DEFECTIVE OR DOES NOT FIT" CABLES CLAIM; MEANING THAT THE INSTALLER MUST BE QUALIFIED AND MUST KNOW THE INSTALLATION STEPS WELL; EXPERIENCE IS HELPFUL.
IN CASE OF RETURNING A USED/DAMAGED CABLE SET, WE MIGHT DEDUCT 25% DEPENDING
ON THE PARTS RETURNED FOR MANUFACTURING.
AGAIN, IF YOU ARE UNSURE OF THE PROCESS, PLEASE
COMMUNICATE
WITH US SINCE WE ALSO INSTALL THE CABLES PROPERLY AS A SERVICE. YOUR ORIGINAL KIT PURCHASE WILL BE CREDITED TOWARDS THE SERVICE PRICE (9 minus )
THANK YOU FOR YOUR PURCHASE AND WE HOPE THAT OUR SOLUTION SAVES YOU A LOT.